Benefits
- Simple installation and maintenance
- Simple and accurate setting of parameters
- Adjustment simple and easy to understand
- Safety-optimized monitoring signals and controller
- Attractive design in anodized aluminium
The OTC 2000 P.I.D. regulator not only allows you
to control a process to the effect that a specific
measuring value is maintained, it also allows you
to alter this value by means of a second pilot signal.
This concept makes it possible to ensure regulation
which optimizes a given regulation process - even in
situations where this process does not have the
same optimum value under all conditions.
- Power supply: 230 V AC 50/60 Hz
- Power consumption: Max. 10 VA
- Dimensions: H x W x D 244x240x56 mm
- Analog inputs: Oxygen signal: 4(0) -20mA
Load value: 4(0) - 20 mA or potentiometer
- Control Signals: Startsignal, two control signals, curve selection
and three signals from the servomotor
(three point regulation) - Analog output: 4(0) - 20 mA Correction signal
- Contact output: Three point signals: UP / STOP / DOWN
Alarms: 2 breaker contacts
- Display: Seven segment L.E.D. with three digits -
When the OTC 2000 receives an oxygen measuring
signal from the OS / OC 2000 and a signal from
the potentiometer fitted on a burner fuel valve,
the air/fuel mix can be regulated in such a manner
that the burner is maintained at the oxygen value
which is ideal for the specific performance at all levels.
Thanks to this design the burner needs not have
a large excess capacity of combustion air in order
to compensate for the following factors:
1 - Combustion air temperature, pressure and
humidity.
2 - Fuel temperature, pressure, specific and calorific
value.
